Build Release Notes 2024.4

The October 2024 release of Dalux is here (version 2024.4). See our highlighted features, and changelog below.

Highlight 1 - SiteWalk improvements.png

Highlight 2 - Infra support for map.png

Highlight 3 - Partial extent.png

SiteWalk improvements InfraField better map support Partial extent

Recording SiteWalks is easier and more streamlined with an updated UI, better guides, and firmware update reminders.

Save phone data by waiting for a Wi-Fi connection before uploading SiteWalks.

SiteWalk recording time has been extended to four minutes and the Insta360 X4 camera is now supported.

The map of InfraField now has more options on the app.

Support has been added for displaying drawings, zones, and models in top-down view, on the map. With this change, more information is available on the map for users on the go.

Partial extent for test- and inspection plans lets you set the extent to be a partial percentage or number when setting up extent using 2D or 3D object groups. This makes it possible to set the extent to fit contractual agreements where the requirement is to check a certain percentage/count of the total amount of objects.

 

Changelog

Field

DaluxIcon_sitewalk.pngSiteWalk

InfraField

 

Field

Partial extent for test- and inspection plans

Partial extent for test- and inspection plans lets you set the extent to be a partial percentage or number when setting up extent using 2D or 3D object groups. This makes it possible to set the extent to fit contractual agreements where the requirement is to check a certain percentage/count of the total amount of objects:

DA-57381 Partial extent.png

(Click the image to enhance)

DA-58574 Partial extent for inspection plan matices.png

(Click the image to enhance)

When the checks are planned they will be displayed as dots with a blue outline (as they are today). When the predefined extent has been checked in a zone, they will all change to a green outline:

DA-57381 Partial extent - blue and green dots.png

The doughnut diagrams will reflect the planned progress. So if 10% of 100 objects has been set as the partial extent, the doughnut will display 100% complete when 10 has been checked.

 

'Reference' column for test- and inspection plans on mobile

The "Reference" column that was added to test- and inspection plans is now supported on mobile as well. You can see the information for the column, when you click the DaluxIcon_info.png icon:

DA-65425 Add new column for test- and inspection plans (mobile).png

(Click the image to enhance)

SiteWalk

Improved SiteWalk interface

Recording a SiteWalk is simpler now with the new interface. The overall experience is smoother, there are more helpful tips, and clearer error messages if something goes wrong.

(Click the image to enhance)

Notification for outdated camera firmware

To ensure the best SiteWalk result you should always use the latest firmware for your camera. Dalux will now notify you if a firmware update is recommended or required.

(Click the image to enhance)

Automatically connect to camera Wi-Fi

If you have previously connected to a camera Wi-Fi, the Dalux app can now automatically connect to the camera when doing SiteWalks. If you have used multiple cameras they will appear in a list, and you can choose which camera to connect to.

(Click the image to enhance)

Added support for Insta360 X4 camera

Dalux now supports recording SiteWalks with the Insta360 X4 camera. You can read more about this camera here.

 

Wait for Wi-Fi before uploading SiteWalks

You can wait for a Wi-Fi connection before uploading your SiteWalks from your phone. SiteWalks will be stored on your device until a Wi-Fi connection is established ,and will then be uploaded to Dalux for processing.

 

SiteWalk recording time extended

SiteWalk now allows recordings up to 4 minutes long.

 

ReleaseNotes_infrafield-large.pngInfraField

Support for model top-down view on map

Models are now available in the top-down view on the map on mobile, you can see both areas and structures:

DA-53266 Model top down view over map.png

(Click the image to enhance)

 

Support for drawings on the map

Drawings can be turned on to be viewed on the map:

DA-59793 Support for drawings on map.png

(Click the image to enhance)

Support for zones on the map

Zones are available to  be viewed on the map, you can select multiple at a time, so they are all displayed:

DA-59796 Support for zones on the map.png

(Click the image to enhance)

Read GIS property from tasks/checklists

GIS properties can be pulled with the 'BIM property' task and checklist field when creating a task over an object which contains that property:

DA-53159-53161 GIS properties in task and checklists.png

(Click the image to enhance)

GIS styling visible on mobile

GIS styling visualization is now visible on the mobile:

DA-59805 GIS styling visible on mobile.png

(Click the image to enhance)

Articles in this section

See more